Color Coating - ECC1100

Ecopoxy Color Coatings® contains NO toxic organic compounds or heavy metals and is easily roller applied. No special equipment is needed. Our product applies at approx 15mils per coat; unlike other coatings that apply at 2-5 mils at best.

Ecopoxy Color Coating® is a waterproof protective coating which is a 100% solid thermosetting epoxy made from soybeans, beans and peanuts, with titanium and flex enhancers added, for better durability and flexibility.

What makes Ecopoxy Color Coating Different?
Other coatings dry from the bottom up and contain harsh solvents like MEK or Acetone, these solvents out-gas when drying, causing air pockets and pin holes that absorb moisture, this is why other coatings or paints FAIL overtime and delaminate, peel, and flake. Coatings and paints that are not solid contain fillers like; sand or clay that contribute to chalking. Solvent based paints or coatings have a strong odor and are hazardous.

Ecopoxy Color Coating® does not have harsh solvents in its mixture. Ecopoxy Color Coating® is 100% solid, odorless, non-toxic and safe. Ecopoxy Color Coating® dries from the top down eliminating the cause of out-gassing and pin holes and will not FAIL overtime. 

Product Information: (Color Resin, Part A)
Appearance - Selection
Weight Per Gallon - 9 lbs
Coverage Per Gallon - 100 -116 Sq.ft. per mixed gallon
Total Thickness - 14 - 16 mils
Mix Ratio - 2:1 by volume
Mixed Viscosity - 13,000 cps
Pot Time - 20 minutes @72 degrees F
Gel Time - 20 - 30 minutes
Thin Film Set - 4 - 6 hours
Full Cure - 72 hours

Product Information: (Hardener, Part B)
Appearance - Clear
Weight Per Gallon - 9 lbs
Coverage Per Gallon - 100 -116 Sq.ft. per mixed gallon
Total Thickness - 14 - 16 mils
Mix Ratio - 2:1 by volume
Mixed Viscosity - 13,000 cps
Pot Time - 20 minutes @72 degrees F
Gel Time - 20 - 30 minutes
Thin Film Set - 4 - 6 hours
Full Cure - 72 hours