At 77°F
Ecopoxy Putty is very fast drying and can be sanded in 3-4 hours after
application. It is the fastest drying 100% solids epoxy filler allowing the job
to be finished sooner. It is particularly easy to sand if done before curing for
72 hours. It can be applied to 5/8" without sagging and can be applied to
greater thicknesses when filling a hole or void without cracking. If you are
looking for an easy to use, fast drying, highly water resistant epoxy filler for
use above and below water line.
Ecopoxy Putty is an easy to use, 4-to-1 mix fairing compound formulated for very fast drying and high water resistance. Used to fill, fair or shape areas above and below water, Ecopoxy Putty fills holes and scratches in gelcoat, fiberglass, as well as aluminum, steel and wood surfaces. This solvent free filler will not shrink when drying and ideal for gelcoat blister repairs.
|
Mixing ratio
|
4:1 Mix Ratio (Resin to Hardener)
|
|
Pot life (Working)
|
30 min. at 68°F
|
|
Application method
|
Trowel-Spatula
|
|
Theoretical coverage
|
40.8 Sq. Feet/Gallon for each 40 mils (0.04 inches - 1
mm) of thickness
|
|
DRYING TIME Sanding
|
3-4 Hours
|
|
DRYING TIME Fully cured
|
3 days
|
|
Below Water Line (yes/no):
|
Yes
|
|
Brand:
|
Ecopoxy Systems
|
|
Material:
|
Epoxy
|
|
Number Of Parts:
|
Two Part
|
|
Type:
|
Putty
|
|
Rate Of Cure:
|
Fast
|
UVpoxy has an easy to use 1 to 1 by volume mix ratio, wets out substrates well, maintains its integrity over sharp corners, it has excellent air release qualities, and a relatively fast set time for an epoxy coating which may be accelerated by mild heat to 160 F. pot time 25-30 mins. 
Comment