GENERAL SAFETY
While working with any resins or epoxies, it is essential to follow general safety procedures, including wearing rubber based gloves, eye protection and necessary clothing. Our epoxy coatings are a lot safer to use than standard products of its kind. However, some people may get an allergic reaction to the nut base. If you have any allergies to nuts, we do not recommend you handle the product in its wet state. Once fully cured it is completely *safe for those allergic to nuts. Most reactions people may get from our nut-based products may be minor but may cause discomfort.  Luckily these matters can be avoided by handling our products with care. Using responsible actions with any epoxy helps prevent accidents and/or liabilities.

Compared to other resin products EcoPoxy® is the least-toxic, safest and responsible percentage is what separates a natural sustainable material from a petro-chemical derived formula. Industry codes / law establish chemistry content for safety and structure such as retardants, colorants, and stabilizers, if it were possible it would not be contained in our formulation, at this time it is not possible. EcoPoxy® holds these requirements to an absolute minimum; comparatively it exceeds all other manufacturers’ resins produced/ available.
EcoPoxy® is a sustainable currently available. With any compounded product, content, natural agricultural product, not wholly derived from petro chemistry.  Specific testing requirements can be acquired based on the application of the end user. EcoPoxy® strives to be as ecologically responsible as possible in today’s market and is presently working on a greener formulation. There is no panacea in the resin industry. However, you can make the best choice possible.

Our resins, hardeners and top-coating can be used indoors or outdoors. No air scrubbers are needed.
Although our resins are odorless, our hardeners have a nominal smell due to the catalysts,
adequete room ventilation is recommended. Respirators are not required.

                                   
TYPICAL PHYSICAL DATA                                             Exotherm Analysis
Click Here for Typical Physical Data                                  Click Here for Exotherm Analysis
                                                                                                   
OSHA Lab Results                                                           Temperature Cure Profile
Click Here for OSHA Lab Results                                       Click Here for Temp Cure Profile

Adhesion Test Results                                                    Technical Specifications
Click Here for Adhesion Test                                             Click Here for Technical Specs

                          
EcoPoxy Clear Resin                                Click Here for EcoPoxy Clear Resin
EcoPoxy Hardener                                   Click Here for EcoPoxy Hardener
EcoPoxy Clear Hardener                         Click Here for Clear Hardener
EcoPoxy Clear Fast Set Hardener          Click Here for Clear Fast Set Hardener



*Non-Toxic, *Safe – our coatings are safe to use, however,
if you have any nut allergies, check to see if you have a reaction
to the product before working with it.
Please refer to our safety data for more information.